Older floppy discs can be a bother to dispose of. Fortunately, there are numerous recycling projects that make use of your own old floppy disks and one of them is to construct floppy disk holders for your own pencils. This project is pretty easy to produce which is great for folks who like personal computers and also recycling. The pen holder would also assist you to arrange your own pens. Study these simple steps to build your own pen holder out of outdated floppy discs:
Get the supplies and also instruments needed
Make sure to obtain the following instruments and supplies needed for the project: 5 floppy disks that are three 1/2 by 5 inches in measurement, sixteen zip ties, a piece of old scrap wood, a drill that has a size 5/32 drill bit, as well as a pair of scissors.
Punch slots into four floppy discs
Pick four floppy discs and drill 4 holes into each disk. Be sure you put the old piece of wood on your own work surface or table so you won't damage it during the drilling procedure. The top two openings need be on the top area of the discs on either side of the steel sliders about 1 inch underneath the dent. The bottom level slots need to be drilled on the corners about a half-inch from the base of the disc.
Punch 2 holes on the remaining floppy disc
Regarding the 5th and last floppy disc, drill holes on each of the corner of the disk. This disc will work as the bottom of the pen case. Do not perform anything to this specific floppy disk till it's the moment to place the bottom.
Align the first four discs in a row
Carry the 4 disks you recently drilled and set them alongside to form a row. The steel sliders needs to be placed towards the top for all four disks.
Hook up the discs using the zip ties
You will now must slip the zip ties into the slots and affix the 4 disks together. This particular stage will lead to a straight line consists of the 4 disks. Remember to pull the zip ties securely so that they will be placed together securely.
Form a box by folding the sides
Now you can develop a box through folding the edges around. The last two sides must be attached together using zip ties. Pull tightly to maintain them in place.
Affix the base
Once you've made a box, turn it upside down. The area with the steel sliders will now be on the table. The 5th floppy disc can be connected. Place it on the bottom of the box and then attach it to the edges using the zip ties tucked through the openings. Use the scissors to cut off the ends of the zip ties.
In addition to finding uses for old items that you would otherwise discard, recycling projects can be your own way of preserving the environment.
Author Resource:-
Written by Jacob Schiffer.You can actually discover floppy disk holder pages at http://www.everydayplastics.com/FloppyDiskHolders.php
![[Valid RSS feed]](http://newezinearticles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
